Showing posts with label Spillway. Show all posts
Showing posts with label Spillway. Show all posts

Friday, May 26, 2023

Chute Spillway Discharge

HSWPE 12

Determine the discharge over a Chute spillway with ‘Ogee Crest’ using the following data: The length of the spillway is 250 m, Height of the spillway crest in front of at upstream approach channels is 10 m. The width of the approach channel is 250 m and the depth of water over the spillway crest is 5 m.

Answer :

Given
Length of spillway L = 250 m
Width of channel =250 m 
Cd = 2.2 for Ogee spillway design
h= 10m 
He =5m
h/He =10/5 =2




 from the graph 

C/Cd =1  
C/2.2 =1
C = 2.2





Thursday, May 18, 2023

Spillway Discharge

HSWPE 6

Compute the discharge over an ogee weir with a coefficient of discharge equal to 2.4 and a head of 2 m. The length of the spillway is 100 m. The Weir crest is 8 m above the bottom of the approach channel having the same width as that of the spillway. (7 mark) 

Answer :



HSWPE 7

The Siphon spillway of the rectangular cross-section had the following dimensions at its throat. Height of throat = 1.5 m. Width of throat = 4 m. At the design flow, the tailwater elevation is 7 m below the summit of the siphon, and the headwater elevation is 2 m above the summit. Taking the coefficient of discharge as 0.6, determine the discharge capacity of the siphon. Also, determine the head that would be required on an ogee spillway 3.8 m long to discharge this flow if the coefficient of discharge is 2.25. (7 mark)

Answer :




HSWPE 8

A siphon spillway had the following cross-section at its throat. Height of the throat = 1.5 m. Width of throat = 4 m. At the design flow, the tail water elevation is 2 m above the summit.
i.   Taking a coefficient of discharge as 0.6, determine the capacity of the siphon.
ii. Determine the head that would be required on an ogee spillway 3.8 m long to discharge this flow, if coefficient of discharge is 2.25.
iii. What length of the ogee weir would be required to discharge the same flow with a head of 2.2 m on the crest? (7 mark)

Answer :


HSWPE 9

A saddle siphon spillway has the following data. Full reservoir level = 485 m, Level of the center of siphon outlet = 479.6 m, Highest flood level = 485.9 m, Highest flood discharge = 570 cumecs. If the dimensions of the throat of the siphon are: width = 4.2 m and height = 1.9 m, determine the number of siphon units required to pass the flood safely. The siphon is to discharge freely in the air. Assume the coefficient of discharge = 0.65. (6 mark)

Answer :





Terracotta Jali Brick